Quality Standards and Environmental Certifications
×

Electric Motorcycle, Scooter and Moped​

Driven by innovation and long history servicing the motorized vehicles markets, Allegro offer state of the art sensors, motor drivers and power solutions that help you take your design to the next level in terms of efficiency, size, reliability and robustness.

Select a subsystem below to view related products. 

e-Scooter application diagram
  • More

    Charging Current Sensing

    ACS724 – Isolated Current Sensor

    ACS711 – 0A-31A Hall Current & Fault Sensor

    Close
  • More

    Motor Encoder ​& Position Sensor​

    APS12210 – High Temperature Precision Hall-Effect Latch

    AAS33001 – Programmable Angle Position Sensor

    Close
  • More

    Brake Lever Position

    A1120 – Hall Switch

    APS11700 – Micropower Hall-Effect Switch

    Close
  • More

    Wheel Speed & ​Direction (ABS)​

    ATS19480 – GMR Speed Sensor

    A19250 – GMR Speed Sensor

    ARS19200 – Hall Speed Sensor

    Close
  • More

    Storage Trunk

    APS13568 – LED Driver with Integrated Micropower Hall-Effect Switch Close
  • More

    Motor Phase Current Sensing

    ACS71240 – 0A-50A Current + Fault Sensor

    ACS72981 – 0-200 A Integrated Conductor Current Sensor

    ACS37610 – Coreless Current Sensor

    ACS70310 – Programmable Linear Sensor IC

    Close
  • More

    Traction Motor Driver​

    A89500 –100V Fast Switching Half Bridge MOSFET Driver

    A4915 –Three-Phase MOSFET Driver

    AMT49100 – BLDC MOSFET Gate Driver

    Close
  • More

    Tilt & Bank Sensor​

    A112x – Hall Switch

    A1330 – Programmable Angle Position Sensor

    Close
  • More

    Headlight, Taillight &​ Indicator Light​

    A6217-1 – Buck Regulator LED Driver

    A6271-1 – Boost or Buck/Boost LED Driver

    ALT80802 – Buck or Buck/Boost LED Driver

    Close
  • More

    Throttle Position

    A1330 –Programmable Angle Position Sensor

    A1308 –5V Linear Position Sensor

    A31315 – 3D Magnetic Hall-Effect Sensor

    Close

Featured Products

Allegro EX 12 Package

ACS71240

Automotive-Grade, Galvanically Isolated Current Sensor IC

Learn More

10-contact DFN EJ Package

A89500

100V Fast Switching Half Bridge MOSFET Driver

Learn More

Allegero 14-Pin TSSOP LU Package

A31315

3D Hall-Effect Sensor for Rotary and Linear Position Measurement

Learn More

Documentation & Resources

Hall-Based BLDC Gate Drive Saves Microprocessor IO and Provides Zero Speed Torque

Technical Article

Hall-Based BLDC Gate Drive Saves Microprocessor IO and Provides Zero Speed Torque

September 08, 2022

P0127: Many BLDC motor applications require Hall-based position sensing to accommodate direction changes quickly and provide holding torque.. Allegro ...

Learn More
Design Considerations in Selection of Converter Configuration for Automotive LED Headlight Applications

Application Note

Design Considerations in Selection of Converter Configuration for Automotive LED Headlight Applications

This application note discusses LED headlights for two-wheelers, passenger vehicles, commercial vehicles, and mild hybrid vehicles, and explores ...

Learn More
Angle Error Correction with the A33230

Application Note

Angle Error Correction with the A33230

This application note describes the mathematics to convert the analog sine/cosine outputs of the A33230 into an angular position.

Learn More
Brochure: Driving Change by Advancing Personal Mobility Through Cutting-Edge Technology

Brochure

Brochure: Driving Change by Advancing Personal Mobility Through Cutting-Edge Technology

Our advanced sensor and power IC solutions are engineered specifically to meet the unique requirements of these designs, providing superior ...

Learn More
Allegro Product Selection Guide

Selection Guide

Allegro Product Selection Guide

Sense. Regulate. Drive. Check out our device offerings and packages across all of our product families in this PDF selection guide.

Learn More
Two Wheeler Stop/Tail LED Driver

Application Note

Two Wheeler Stop/Tail LED Driver

October 28, 2020

AN296207 - In two-wheeler stop and tail light applications, particularly those that use a Rear Combination Lamp (RCL), OEMs use LEDs instead of ...

Learn More
Differential Hall-Effect Sensors: Safer and More Reliable for Two-Wheelers of the Future

Application Note

Differential Hall-Effect Sensors: Safer and More Reliable for Two-Wheelers of the Future

August 27, 2019

AN296173 - The use of electronic controls for engine, transmission, and wheel speed in two- and three-wheeled vehicles is growing, particularly in ...

Learn More
On Axis vs. Off Axis Angle Sensor IC Measurement Configurations

Video

On Axis vs. Off Axis Angle Sensor IC Measurement Configurations

April 09, 2019

Allegro’s family of contactless Hall magnetic high resolution 360° angle sensor ICs are designed for safety critical automotive and industrial ...

Learn More
Allegro Differential Speed Sensor System Solutions

Video

Allegro Differential Speed Sensor System Solutions

Seth Prentice, Strategic Marketing Manager for Allegro MicroSystems Speed Sensor IC group, discusses IC solutions for designing speed sensing ...

Learn More
Method for Mechanical Mounting Tolerance Compensation on Allegro Speed Sensors

Application Note

Method for Mechanical Mounting Tolerance Compensation on Allegro Speed Sensors

AN296175 - Accuracy requirements for absolute mechanical edge detection on cam sensors and more generally on engine management speed sensors have ...

Learn More
Using the A1330 in a Short Stroke Application

Application Note

Using the A1330 in a Short Stroke Application

AN296163 - This application note is a guide for using the A1330 angle sensor IC for short stroke rotational position sensing, including information ...

Learn More
Crank Sensor IC for Stop-Start

Technical Article

Crank Sensor IC for Stop-Start

This article describes start-stop operation and enabling Hall-effect integrated circuits, in particular the Allegro MicroSystems ATS694 and the ...

Learn More
‹ ›