ATS668LSM: True Zero-Speed High-Accuracy Gear Tooth Sensor IC

ATS668SLM Product Image

Description

Top Features

Packaging

The ATS668LSM is an optimized Hall-effect integrated circuit (IC) and permanent magnet pellet combination with integrated EMC protection components to provide a user-friendly solution for true zero-speed digital gear tooth sensing. The small package can be easily assembled and used in conjunction with a wide variety of gear tooth sensing applications.

The device incorporates a dual element Hall IC that switches in response to differential magnetic signals created by a ferromagnetic target. The IC contains a sophisticated compensating circuit designed to eliminate the detrimental effects of magnet and system offsets. Digital processing of the analog signal provides zero-speed performance independent of air gap and also dynamic adaptation of device performance to the typical operating conditions found in automotive applications (i.e. vibration immunity and runout tolerance).

High-resolution peak detecting DACs are used to set the adaptive switching thresholds of the device. Hysteresis in the thresholds reduces the negative effects of any anomalies in the magnetic signal associated with system or target anomalies typically seen in many automotive applications.

This device is available in a lead (Pb) free 3-pin SIP package (SM) with matte-tin lead frame plating.


  • Three-wire back-biased speed sensor optimized for transmission speed-sensing applications
  • Integrated in-package EMC protection circuit allows compliance to most Automotive EMC environments without external circuitry
  • Small-signal lockout for immunity to vibration
  • Tight timing accuracy over full operating temperature range
  • True zero-speed operation
  • Air gap independent switchpoints
  • Large operating air gaps achieved through use of gain and offset adjust circuitry
  • Wide operating voltage range with undervoltage lockout (UVLO)
  • Digital output representing target profile
  • Single-chip sensing IC for high reliability
  • High-speed startup
SM_Package

This device is available in a lead (Pb) free 3-pin SIP package (SM) with matte-tin lead frame plating.

SM Package Documentation

Part Number Specifications and Availability

Documentation and Resources

Documentation

Filter Document Type:
All Types
All Types Application Note
Documents Found: 32
Document Type Document Name
Application Note
Fundamental Properties of Speed Sensors